Physical

Size:

Width (2.5 in/63.5 mm)
Height (6.5 in/165 mm)
Depth (1.24 in/31.5 mm)

Weight:
13.5 ounces (with batteries).

Keyboard:
Membrane switch pad with twelve tactile keys.

Operating Temperature:
14 to 140F (-10C to 60C)

Case:
Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).

Data Output:
Bi-directional RS232 serial port. Windows® PC interface software.

Display (Two Options):
1/8 VGA grayscale display (240 x 160 pixels). Viewable area 2.4 x 1.8 in (62 x 45.7 mm). EL backlit (on/off/auto). 25 Hz screen refresh rate.

1/4 VGA AMOLED color display (320 x 240 pixels). Viewable area 1.7 x 2.27 in (43.2 x 57.6 mm). 120 Hz screen refresh rate.

Ultrasonic Specifications

Measurement Modes:

Coating Off: Pulse-Echo (P-E)
Coating On: Pulse-Echo Coating (PECT)
Temp Comp: Pulse-Echo Temperature Compensation (PETP)
Thru-Paint: Echo-Echo (E-E)
Thru-Paint Verify: Echo-Echo Verify (E-EV)
Coating Only: Coating (CT)

Pulser:
Dual square wave pulsers.

Receiver:
Dual receivers - manual or AGC gain control with 100 dB range. Adjustable damping with color option.

Timing:
Precision 25 MHz TCXO with single shot 100 MHz 8 bit ultra low power digitizer.

Power Source

Three 1.5V alkaline or
1.2V NiCad AA cells.

Alkaline: grayscale up to 50 hours, and color up to 25 hours.

Nicad: grayscale up to 25 hours, and color up to 12 hours (charger not included).

Auto power off if idle 5 min.

Adjustable Dim feature for color display only. Power saving.

Battery status icon.

Measuring

Pulse-Echo Mode (P-E) - (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 508 millimeters).

Pulse-Echo Coating Mode (PECT) - (Material, Coating, Pit & Flaw Detection): Material: 0.025 to 19.999 inches (0.63 to 508 millimeters). Coating: 0.001 to 0.100 inches (0.01 to 2.54 millimeters).

Pulse-Echo Temp Comp Mode (PETP) - (Pit & Flaw Detection) Auto temperature compensation -measures from 0.025 to 19.999 inches (0.63 to 508 millimeters).

Echo-Echo Mode (E-E) - (Thru Paint & Coatings) measures from 0.050 to 4.0 inches (1.27 to 102 millimeters). Will vary based on coating.

Echo-Echo Verify (E-EV) - (Thru Paint & Coatings) measures from 0.050 to 1.0 inches (1.27 to 25.4 millimeters). Will vary based on coating.

Coating Only Mode (CT) - (Coating Thickness) Measures from 0.0005 to 0.100 inches (0.0127 to 2.54 millimeters). Range will vary +/- depending on the coating.

Resolution:
+/- 0.001 inches (0.01 mm)

Velocity Range:
0.0492 to 0.5510 in/micro sec
1250 to 13995 meters/sec

Single and Two point calibration option for material & coating, or selection of basic material types.

Units:
English & Metric

Display

Large Digits - Standard thickness view. Digit Height: 0.700 in (17.78 mm). Color 0.565 in (14.35 mm).

A-Scan - Rectified +/- (flaw view)

RF (full waveform view).

B-Scan - Time based cross section view. Adjustable display speed.

Scan Bar Thickness - 6 readings per second. Viewable in B-Scan and Large Digit views.

Repeatability Bar Graph - Bar graph indicates stability of reading.

Feature Status Bar - Indicates features currently active.

Data Storage

Log Formats:
Grid (alpha numeric)
Sequential (auto identifier)

Cell contents:

Graphics On:
Grayscale 16,000 & Color 8,000 readings ,A/B-Scan image, & gauge settings for every reading.

Graphics Off:
210,000 readings (coating, material, min & max)

OBSTRUCT to indicate inaccessible locations.

Transducer

Transducer Types:

Dual Element (1 to 10 MHz).
Flaw Prove Up (1 to 10 MHz).

LEMO “00” connectors.

Standard 4 foot cable.

Custom transducers & cable lengths available for special applications.

Additional Features

Auto probe zero, recognition and temperature compensation.

64 custom setup configurations.

High speed scan up to 50 readings per second.

Audible alarm with hi/lo limits.

Built-in differential mode for QC inspections.

Warranty & Certification

2 year limited
Factory calibration traceable to NIST & MIL-STD-45662
CE approved