|
The adjustable square wave pulser
provides the flexibility necessary for both high
resolution
and
penetration requirements.
The MVX is equipped with multiple
viewing options to provide users with a complete
set of
inspection tools: (RF waveform, +/- Rectified
waveform, Time based B-Scan, and Large Digits). The A-Scan rectified mode is commonly
used for detecting flaws/pits in pulse-echo mode
and measuring thru-paint and coatings in
echo-echo mode. The time-based B-Scan feature of
the MVX displays a cross section of the test material.
It is commonly used to display the profile of
the bottom surface of the test material. Built-in hardware AGC gain control
for thrupaint measurements in multi-mode operation. The variety of calibration options
is just one more example of MVX’s overall versatility. The MVX has the ability to store
64 custom user-defined setups. All factory setups
can
be selected, edited and saved to any setup
location. MVX is equipped with an alpha-numeric
data logger to provide increased versatility for
those
custom reporting needs. The built-in transducer types offer
increased linearity between transducers. The high speed scan feature speeds
up the inspection process by making 32 measurements
per second. Remove transducer from
the test material and display the minimum
measurement scanned. Use the visual alarm to set hi and
lo limits for applications requiring specific tolerances.
If the actual thickness value is above or below
the limits, a red light is illuminated. Use the find feature to locate the
detection point, while automatically adjusting
the display
to bring the signal into view.
Use the flaw mode for basic prove-up
using single element angle beam transducers.
The MVX also
comes complete with our Windows® PC software
for transferring data to and from a PC. Viewing
B-Scans and general measurements, set break-points,
view statistics, and export files into excel.
2 year limited warranty
|
