|
Physical
Weight: 10
ounces
Size:
2.5 W x 4.75 H x 1.25 D
inches (63.5 W 120.7 H x 31.8
D mm)
Operating
Temperature:
-20° to
120° F
(-30° to
50° C)
Case:
Extruded aluminum body / nickel plated aluminum
end caps.
Resistant
to impact and environmentally sealed.
Keypad
Sealed membrane that is resistant
to both water and petroleum
products.
Nine tactile-feedback
keys.
Transducer
Dual element (transmit and receive).
1
to 10 MHz frequency range.
Locking quick disconnect LEMO
connectors.
4 foot cable.
Optional cable lengths up to 100 feet.
Custom
transducers available for special
applications.
|
Power
Source
Two
1.5V alkaline or 1.2V
NiCad AA cells
Typically
operates for 200
hours on alkaline and
130 hours on NiCad.
Display
flashes when battery is low. Unit turns off automatically
when battery is
too low to operate reliably.
Display
Multi-function
4.5 digit liquid crystal
display with 0.500 inch numerals, backlit for
use in poor light conditions.
Backlight
is selectable:
on / off / auto (
illuminates only when taking a
measurement ).
Measurements
displayed in inches,
inches/microsecond. millimeters,
and mters/second.
Bar
graph indicates stability
of reading.
Data
Logger
Automatic numeric
Data Logging system 1 to 1000 readings.
Certification
Factory calibration traceable to
national standards.
Warranty
5
year limited
|
Measuring
Range:
Measures from 0.025 to 19.999
inches (0.63 to
500 millimeters).
switch to select English or metric
units.
Resolution:
0.001 inches (0.01 millimeters)
Velocity
Range:
.0492 to .3937
in/m s 1250
to 10,000 meters/sec
Built
in:
Stainless
steel reference disk for probe zeroing.
Four
readings per second for
single point measurements or 16 per second in
scan mode – captures the minimum thickness.
Single
and Two point calibration option included.
Features:
Differential
Mode:
Enter acceptable
thickness value, unit will display
+/- the difference from the value entered.
Alarm
Mode:
Enter a minimum acceptable thickness value. If
measurement falls below
minimum, red led will illuminate and sound beeper. If
measurement is
above minimum value, green led will illuminate.
Data
Ouput:
RS232 output sends thickness readings
to a printer, computer or other external
storage device.
|
