Physical

Weight:
13.5 ounces (with batteries).

Size:
2.5 W x 6.5 H x 1.24 D inches
(63.5 W x 165 H x 31.5 D mm).

Operating Temperature:
-14° to 140°F (-10° to 60°C).

Keyboard:
Membrane switch with twelve tactile keys.

Case:
Extruded aluminum body
with nickel-plated aluminum
end caps (gasket sealed).

Data Output:
Bi-directional RS232 serial port. Windows® PC interface software.

Display:
1/8 in. VGA grayscale display
(240 x 160 pixels). Viewable area 2.4 x 1.8 in. (62 x 45.7mm).
EL backlit (on/off/auto).

Ultrasonic Specifications

Measurement Modes:
Pulse-Echo (flaws, pits)
Echo-Echo (thru-paint - chassis tubing)

Pulser:
Square wave pulser

Receiver:
Selectable low, medium, or high gain in Pulse-Echo mode or AGC gain control in Echo-Echo mode.

Timing:
20 MHz with ultra low power
8 bit digitizer.

Power Source

Three 1.5V alkaline or 1.2V NiCad AA cells.

Typically operates for 150 hours on
alkaline and 100 hours on NiCad
(charger not included.)

Auto power off if idle 5 min.

Battery status icon.

Measuring

Range:

Pulse-Echo Mode: (Pit&Flaw Detection) measures from
0.025 9.999 inches (0.63 to 254
millimeters).

Echo-Echo Mode: Thru Paint &
Coatings) measures from 0.05 to 4.0
inches (1.27 to 102 millimeters).
Range will vary +/- depending on the
thickness of coating.

Resolution: +/- .001 inches (0.01 mm)

Velocity Range:
.0492 to .3936 in./ms 1250 to 9999 meters/sec

Single and Two point calibration option, or selection of basic material types.

Units: English & Metric

Display

Display Views:

Large Digits Standard thickness
view. Digit Height: 0.400 in (10mm).

B-Scan Cross sectional view.
Display speed of 15 secs per screen.

Scan Bar 6 readings per second. Viewable in B-Scan and Large Digit views.

Repeatability Bar Graph Bar graph
indicates stability of reading.

Data Logger
(Internal)

12,000 readings and B-Scans (alpha numeric storage).

OBSTRUCT to indicate inaccessible locations.

Memory:
16 megabit non-volatile ram.

Transducer

Transducer Types:
Dual Element (1 to 10 MHz).

Locking quick disconnect “ 00” LEMO connectors.

Standard 4 foot cable.

Custom transducers and cable lengths available for special
applications.

Features

Setups:
64 custom user-definable setups.
Factory setups can also be edited by
the user.

Selectable Transducers:
Selectable transducer types with built-in dual path error correction for
improved linearity.

Alarm Mode:
Set hi and lo tolerances with
audible beeper and visual LEDs.

Fast-Scan Mode:
Takes 32 readings per second and
displays the minimum reading found when the transducer is removed.

Certification

Factory calibration:

traceable to
national standards.

Warranty

2 year limited