Physical

Weight:
13.5 ounces (with batteries).

Size:
2.5 W x 6.5 H x 1.24 D inches
(63.5 W x 165 H x 31.5 D mm).

Operating Temperature:
-14° to 140°F (-10° to 60°C).

Keyboard:
Membrane switch with twelve tactile keys.

Case:
Extruded aluminum body
with nickel-plated aluminum
end caps (gasket sealed).

Data Output:
Bi-directional RS232 serial port. Windows® PC interface software.

Display:
1/8 in. VGA grayscale display
(240 x 160 pixels). Viewable area 2.4 x 1.8 in. (62 x 45.7mm).
EL backlit (on/off/auto).

Ultrasonic Specifications

Measurement Modes:
Pulse-Echo (Precision General purpose).

Interface-Echo (Precision - Thick materials).

Echo-Echo (Precision - Thin materials & thru-paint).

Pulser:
Square wave pulser with adjustable
pulse width (spike, thin, wide).

Receiver:
Manual or AGC gain control with
40dB range, depending on mode
selected.

Timing:
40 MHz with ultra low power
8 bit digitizer.

Power Source

Three 1.5V alkaline or 1.2V NiCad AA cells.

Typically operates for 150 hours on
alkaline and 100 hours on NiCad
(charger not included.)

Auto power off if idle 5 min.

Battery status meter.

Measuring

Range:

Interface-Echo Mode: Steel 0.05 1.0 in (1.27mm - 25.4mm). Plastics from .005in. (127mm).

Echo-Echo Mode: Steel .006in -.500in (.15mm - 12.7mm).

Pulse-Echo Contact: Steel .040in - 10.0in (1mm - 254mm). Plastics from .010in (.254mm).

Echo-Echo Contact: Steel thru-paint .100in - 3.0in (2.54mm - 76.2mm).

Resolution: (selectable) +/- .001in (0.01 mm), or +/- .0001in - (.001mm).

Velocity Range:
.0492 to .3936 in./ms 1250 to 9999 meters/sec

Single and Two point calibration option, or selection of basic material types.

Units: English & Metric

Display

Display Views:

A-Scan Rectified +/- (half wave view) RF (full waveform view)

B-Scan Time based cross section view. Display speed of 15 secs per screen.

Large Digits Standard thickness
view. Digit Height: 0.400 in (10mm).

Scan Bar 6 readings per second. Viewable in B-Scan and Large Digit views.

Repeatability Bar Graph Bar graph
indicates stability of reading.

Data Logger
(Internal)

12,000 readings and waveforms (alpha numeric storage).

OBSTRUCT to indicate inaccessible locations.

Memory:
16 megabit non-volatile ram.

Transducer

Transducer Types:

Single Element (1 to 20 MHz).

Locking quick disconnect “ 00” LEMO connector.

Standard 4 foot cable.

Custom transducer and cable lengths available.

Features

Setups:
16 factory and 48 user-defined setups.

Gates:
Single gate in pulse-echo mode.
Single gate with holdoff in interface-echo, echo-echo, and plastics mode. Adjustable threshold.

Multiple Measurement Modes:
Selectable modes for use with a variety of applications.

Alarm Mode:
Set hi and lo tolerances with
audible beeper and visual LEDs.

Fast-Scan Mode:
Takes 32 readings per second and
displays the minimum reading found when the transducer is removed. Display continuously updates while scanning.

Certification

Factory calibration:

traceable to
national standards.

Warranty

2 year limited