| Physical
Weight:
10 ounces (with
batteries).
Size:
2.5 W x 4.5 H x 1.24 D inches
(63.5 W
x 114.3 H x 31.5 D mm).
Operating
Temperature:
-20° to
120°F (-30° to 50°C).
Case:
Extruded aluminum
body with nickel-plated aluminum end caps.
Sealed connectors and end caps.
Keypad
Sealed
membrane that is
resistant
to both water and
petroleum
products.
9 tactile-feedback
keys.
Transducer
Single
element with delay tip. 10 to 22 MHz frequency
range.
Locking
quick disconnect
LEMO connector.
4
foot cable.
Custom
transducers available for special applications.
Warranty
5
year limited.
|
Power
Source
Two
1.5V alkaline or
1.2V NiCad AA cells.
Typically
operates for
150 hours with alkaline
and
100 hours with NiCad.
Display
flashes when battery is low. Unit turns
off automatically when battery is too
low to operate reliably.
Display
Multi-function
4.5 digit liquid
crystal display with
0.500 inch numerals, backlit for use in poor light
conditions.
Backlight
is selectable
on / off / auto (illuminates
only when taking a measurement).
Measurements displayed
in
inches, inches/microsecond,
millimeters, and
meters/second.
Bar
graph indicates stability
of reading.
Certification
Factory
calibration traceable to national standards.
Internal
Data Logger
(PX-7DL only)
Automatic
Data Logging System 1000 reading capacity,
(10 files of 100 readings each file). OBST
indicates no reading.
Complete
with data acquisition software and
cable.
|
Measuring
Range:
Measures from
0.0060 to 1.0000 inch (0.15 to 25.40 millimeters).
Switch
to select English or
Metric
units.
Resolution:
0.0001 inch
(0.001 millimeter)
Velocity
Range:
0.0492
to .3937 in./µs.
(1250
to 10,000 meters/second).
Measuring
Modes
Interface
to Echo, Echo-to-Echo
(through
paint) and
Auto-Switchable.
Four
readings per second for
single
point measurements or 8 per second
in Scan Mode-captures the minimum thickness.
Single
point calibration.
Features
Differential
Mode:
Enter
acceptable thickness value, unit
will display +/- the difference from
the value entered.
Alarm
Mode:
Enter
a minimum & maximum acceptable
thickness value. If measurement falls
outside Hi/Lo limits, red LED will
illuminate and sounds beep-er. If
measurement is between Hi/Lo limits,
green LED will illuminate.
Data
Output: RS-232
output sends data to a
serial printer, a computer or other
external storage device.
|
